Tuning Supramolecular Chirality in Iodinated Amphiphilic Peptides Through Tripeptide Linker Editing.

Protease-cleavable supramolecular oligopeptide nanofilaments are promising materials for targeted therapeutics and diagnostics. In these systems, single amino acid substitutions can have profound effects on the supramolecular structure and consequent proteolytic degradation, which are critical parameters for their intended applications. Herein, we describe changes to the self-assembly and proteolytic cleavage of iodine containing sequences for future translation into matrix metalloprotease (MMP-9)-activated supramolecular radio-imaging probes. We use a systematic single amino acid exchange in the tripeptide linker region of these peptide amphiphiles to provide insights into the role of each residue in the supramolecular assemblies. These modifications resulted in dramatic changes in the nature of the assembled structures formed, including an unexpected chiral inversion. By using circular dichroism, atomic force microscopy, Fourier transform infrared spectroscopy, and molecular dynamics simulations, we found that the GD loop, a common motif in ß-turn elements, induced a reversal of the chiral orientation of the assembled nanofibers. In addition to the impact on peptide packing and chirality, MMP-9-catalyzed hydrolysis was evaluated for the four peptides, with the ß-sheet content found to be a stronger determinant of enzymatic hydrolysis than supramolecular chirality. These observations provide fundamental insights into the sequence design in protease cleavable amphiphilic peptides with the potential for radio-labeling and selective biomedical applications.

Switched "On" Transient Fluorescence Output from a Pulsed-Fuel Molecular Ratchet.

We report the synthesis and operation of a molecular energy ratchet that transports a crown ether from solution onto a thread, along the axle, over a fluorophore, and off the other end of the thread back into bulk solution, all in response to a single pulse of a chemical fuel (CCl3CO2H). The fluorophore is a pyrene residue whose fluorescence is normally prevented by photoinduced electron transfer (PET) to a nearby N-methyltriazolium group. However, crown ether binding to the N-methyltriazolium site inhibits the PET, switching on pyrene fluorescence under UV irradiation. Each pulse of fuel results in a single ratchet cycle of transient fluorescence (encompassing threading, transport to the N-methyltriazolium site, and then dethreading), with the onset of the fluorescent time period determined by the amount of fuel in each pulse and the end-point determined by the concentration of the reagents for the disulfide exchange reaction. The system provides a potential alternative signaling approach for artificial molecular machines that read symbols from sequence-encoded molecular tapes.

Localized and regulated peptide pigment formation inside liquid droplets through confined enzymatic oxidation.

Melanin pigments are found in most life forms, where they are responsible for coloration and ultraviolet (UV) light protection. Natural melanin is a poorly soluble and complex biosynthesis product produced through confined and templated enzymatic oxidation of tyrosine. It has been challenging to create water-soluble synthetic mimics. This study demonstrates the enzymatic synthesis of oxidized phenols confined inside liquid droplets. We use an amphiphilic, bifunctional peptide, DYFR9, that combines a tyrosine tripeptide previously shown to undergo enzymatic oxidation to form peptide pigments with broad absorbance, and polyarginine to facilitate complex coacervation in the presence of ATP. When ATP, DYFR9 are mixed and exposed to tyrosinase, pigmented liquid droplets result, while no appreciable oxidation is observed in the bulk.

Emergence of Cooperative Glucose-Binding Networks in Adaptive Peptide Systems.

Minimalistic peptide-based systems that bind sugars in water are challenging to design due to the weakness of interactions and required cooperative contributions from specific amino-acid side chains. Here, we used a bottom-up approach to create peptide-based adaptive glucose-binding networks by mixing glucose with selected sets of input dipeptides (up to 4) in the presence of an amidase to enable in situ reversible peptide elongation, forming mixtures of up to 16 dynamically interacting tetrapeptides. The choice of input dipeptides was based on amino-acid abundance in glucose-binding sites found in the protein data bank, with side chains that can support hydrogen bonding and CH-π interactions. Tetrapeptide sequence amplification patterns, determined through LC-MS analysis, served as a readout for collective interactions and led to the identification of optimized binding networks. Systematic variation of dipeptide input revealed the emergence of two networks of non-covalent hydrogen bonding and CH-π interactions that can co-exist, are cooperative and context-dependent. A cooperative binding mode was determined by studying the binding of the most amplified tetrapeptide (AWAD) with glucose in isolation. Overall, these results demonstrate that the bottom-up design of complex systems can recreate emergent behaviors driven by covalent and non-covalent self-organization that are not observed in reductionist designs and lead to the identification of system-level cooperative binding motifs.

Connected Peptide Modules Enable Controlled Co-Existence of Self-Assembled Fibers Inside Liquid Condensates.

Supramolecular self-assembly of fibrous components and liquid-liquid phase separation are at the extremes of the order-to-disorder spectrum. They collectively play key roles in cellular organization. It is still a major challenge to design systems where both highly ordered nanostructures and liquid-liquid phase-separated domains can coexist. We present a three-component assembly approach that generates fibrous domains that exclusively form inside globally disordered, liquid condensates. This is achieved by creating amphiphilic peptides that combine the features of fibrillar assembly (the amyloid domain LVFFA) and complex coacervation (oligo-arginine and adenosine triphosphate (ATP)) in one peptide, namely, LVFFAR9. When this hybrid peptide is mixed in different ratios with R9 and ATP, we find that conditions can be created where fibrous assembly is exclusively observed inside liquid coacervates. Through fluorescence and atomic force microscopy characterization, we investigate the dynamic evolution of ordered and disordered features over time. It was observed that the fibers nucleate and mature inside the droplets and that these fiber-containing liquid droplets can also undergo fusion, showing that the droplets remain liquid-like. Our work thus generates opportunities for the design of ordered structures within the confined environment of biomolecular condensates, which may be useful to create supramolecular materials in defined compartments and as model systems that can enhance understanding of ordering principles in biology.

Pumping between phases with a pulsed-fuel molecular ratchet.

The sorption of species from a solution into and onto solids underpins the sequestering of waste and pollutants, precious metal recovery, heterogeneous catalysis, analysis and separation science, and other technologies1,2. The transfer between phases tends to proceed spontaneously in the direction of equilibrium. For example, alkyl ammonium groups mounted on silica nanoparticles are used to chemisorb cucurbituril macrocycles from solution through host-guest binding3,4. Molecular ratchet mechanisms5-7, in which kinetic gating8-12 inhibits or accelerates particular steps, makes it possible to progressively drive dynamic systems13-16 away from equilibrium17-21. Here we report on molecular pumps22 immobilized on polymer beads23-25 that use an energy ratchet mechanism5,9,19-21,26-30 to directionally transport substrates from solution onto the beads. On the addition of trichloroacetic acid (CCl3CO2H)19,31-33 fuel19,34-37, micrometre-diameter polystyrene beads functionalized38 with solvent-accessible molecular pumps sequester from the solution crown ethers appended with fluorescent tags. After fuel consumption, the rings are mechanically trapped in a higher-energy, out-of-equilibrium state on the beads and cannot be removed by dilution or exhaustive washing. This differs from dissipative assembled materials11,13-16, which require a continuous supply of energy to persist, and from conventional host-guest complexes. The addition of a second fuel pulse causes the uptake of more macrocycles, which drives the system further away from equilibrium. The second macrocycle can be labelled with a different fluorescent tag, which confers sequence information39 on the absorbed structure. The polymer-bound substrates can be released back to the bulk either one compartment at a time or all at once. Non-equilibrium40 sorption by immobilized artificial molecular machines41-45 enables the transduction of energy from chemical fuels for the use, storage and release of energy and information.

Melanin-Inspired Chromophoric Microparticles Composed of Polymeric Peptide Pigments.

Melanin and related polyphenolic pigments are versatile functional polymers that serve diverse aesthetic and protective roles across the living world. These polymeric pigments continue to inspire the development of adhesive, photonic, electronic and radiation-protective materials and coatings. The properties of these structures are dictated by covalent and non-covalent interactions in ways that, despite progress, are not fully understood. It remains a major challenge to direct oxidative polymerization of their precursors (amino acids, (poly-)phenols, thiols) toward specific structures. By taking advantage of supramolecular pre-organization of tyrosine-tripeptides and reactive sequestering of selected amino acids during enzymatic oxidation, we demonstrate the spontaneous formation of distinct new chromophores with optical properties that are far beyond the range of those found in biological melanins, in terms of color, UV absorbance and fluorescent emission.

Site-to-site peptide transport on a molecular platform using a small-molecule robotic arm.

Peptides attached to a cysteine hydrazide 'transporter module' are transported selectively in either direction between two chemically similar sites on a molecular platform, enabled by the discovery of new operating methods for a molecular transporter that functions through ratcheting. Substrate repositioning is achieved using a small-molecule robotic arm controlled by a protonation-mediated rotary switch and attachment/release dynamic covalent chemistry. A polar solvent mixtures were found to favour Z to E isomerization of the doubly-protonated switch, transporting cargo in one direction (arbitrarily defined as 'forward') in up to 85% yield, while polar solvent mixtures were unexpectedly found to favour E to Z isomerization enabling transport in the reverse ('backward') direction in >98% yield. Transport of the substrates proceeded in a matter of hours (compared to 6 days even for simple cargoes with the original system) without the peptides at any time dissociating from the machine nor exchanging with others in the bulk. Under the new operating conditions, key intermediates of the switch are sufficiently stabilized within the macrocycle formed between switch, arm, substrate and platform that they can be identified and structurally characterized by 1H NMR. The size of the peptide cargo has no significant effect on the rate or efficiency of transport in either direction. The new operating conditions allow detailed physical organic chemistry of the ratcheted transport mechanism to be uncovered, improve efficiency, and enable the transport of more complex cargoes than was previously possible.

Stereodivergent synthesis with a programmable molecular machine.

It has been convincingly argued that molecular machines that manipulate individual atoms, or highly reactive clusters of atoms, with Ångström precision are unlikely to be realized. However, biological molecular machines routinely position rather less reactive substrates in order to direct chemical reaction sequences, from sequence-specific synthesis by the ribosome to polyketide synthases, where tethered molecules are passed from active site to active site in multi-enzyme complexes. Artificial molecular machines have been developed for tasks that include sequence-specific oligomer synthesis and the switching of product chirality, a photo-responsive host molecule has been described that is able to mechanically twist a bound molecular guest, and molecular fragments have been selectively transported in either direction between sites on a molecular platform through a ratchet mechanism. Here we detail an artificial molecular machine that moves a substrate between different activating sites to achieve different product outcomes from chemical synthesis. This molecular robot can be programmed to stereoselectively produce, in a sequential one-pot operation, an excess of any one of four possible diastereoisomers from the addition of a thiol and an alkene to an α,ß-unsaturated aldehyde in a tandem reaction process. The stereodivergent synthesis includes diastereoisomers that cannot be selectively synthesized through conventional iminium-enamine organocatalysis. We anticipate that future generations of programmable molecular machines may have significant roles in chemical synthesis and molecular manufacturing.

Artificial molecular motors.

Motor proteins are nature's solution for directing movement at the molecular level. The field of artificial molecular motors takes inspiration from these tiny but powerful machines. Although directional motion on the nanoscale performed by synthetic molecular machines is a relatively new development, significant advances have been made. In this review an overview is given of the principal designs of artificial molecular motors and their modes of operation. Although synthetic molecular motors have also found widespread application as (multistate) switches, we focus on the control of directional movement, both at the molecular scale and at larger magnitudes. We identify some key challenges remaining in the field.

Pick-up, transport and release of a molecular cargo using a small-molecule robotic arm.

Modern-day factory assembly lines often feature robots that pick up, reposition and connect components in a programmed manner. The idea of manipulating molecular fragments in a similar way has to date only been explored using biological building blocks (specifically DNA). Here, we report on a wholly artificial small-molecule robotic arm capable of selectively transporting a molecular cargo in either direction between two spatially distinct, chemically similar, sites on a molecular platform. The arm picks up/releases a 3-mercaptopropanehydrazide cargo by formation/breakage of a disulfide bond, while dynamic hydrazone chemistry controls the cargo binding to the platform. Transport is controlled by selectively inducing conformational and configurational changes within an embedded hydrazone rotary switch that steers the robotic arm. In a three-stage operation, 79-85% of 3-mercaptopropanehydrazide molecules are transported in either (chosen) direction between the two platform sites, without the cargo at any time fully dissociating from the machine nor exchanging with other molecules in the bulk.